On the home screen, tap the small gear in the top-left corner three times within three seconds. This opens “Setup”, where you will find “Manage devices”, “Advanced setup”, “Backup and restore” and the “About” section.
For assistive technologies, the button is labelled “Set up & edit”. With VoiceOver or a keyboard, activate the same button three times within three seconds. This means three complete activations; with VoiceOver, it does not mean a single triple-tap gesture.
If nothing opens, wait briefly and try again. A single tap is not enough. Return to the home screen first if necessary. To close setup, tap “Done”.
This guide is mainly for the trusted person setting up Alltagslotse. Create suitable photo guides, then explain how to use them to the person using the app, together at the actual device.
1. Prepare for setup
Alltagslotse shows your own photos with a marker and a short instruction. The app does not operate the device shown in the photo. A new installation initially contains no personal devices or guides.
Choose a manageable task, such as “Turn on the TV”.
Take clear photos of the actual device and its controls, preferably from the person's usual viewing position.
Plan one action per step. Use familiar words and short sentences.
2. Add a device
Open setup as described above and select “Manage devices” → “Add device”.
Enter a clear device name, such as “Living room TV”.
If helpful, use “Choose photo” to select an image from the photo library or “Take photo” to take a new picture. The device photo is optional.
Tap “Save”. The device appears in the management screen and on the home screen.
The device photo helps the person recognise the device. You add photos for individual guide steps separately.
Reorder devices
In “Manage devices”, use “Move up” or “Move down” to move a device one position at a time. The order is saved immediately and also applies to the home screen. “Move up” is disabled for the first device, and “Move down” is disabled for the last device.
A thin border surrounds each device and its buttons. Guides and individual steps in the guide editor are also separated by these borders.
3. Create a guide with steps
In “Manage devices”, select “Guides (…)” for the device, then “Create guide”.
Give the task a clear title, such as “Turn on the TV”.
Tap “Add step”.
Choose a photo or take one. Every step needs a photo.
The marker is optional. To highlight a button, tap the relevant area in the photo or select “Place marker in the centre”.
Adjust the circle using “Left”, “Right”, “Up” and “Down”; resize it using “Smaller” and “Larger”. Instead of tapping the photo, you can use “Place marker in the centre” to create the first circle. Once a marker exists, “Centre marker” is available.
Whenever possible, enter a short instruction, such as “Press the round power button at the top right.” Text is optional, but is particularly helpful when using VoiceOver.
Tap “Use step”. Repeat for any additional steps.
Check the order. Use “Move up” and “Move down” to rearrange steps.
Tap “Finish guide” to save the entire guide permanently.
“Use step” does not save the entire guide. Steps initially remain in a draft. Only “Finish guide”, or “Save changes” for an existing guide, saves everything permanently.
A guide needs a title and at least one step. Each step needs a readable photo. The marker and instruction are optional. If a device name, task title, steps or a step photo is missing, a message explains what is needed when you try to save or use the step. “Use step” is disabled while a photo is loading; an unreadable photo must be replaced.
The photo appears directly below “Mark the button”. The hint “Use the buttons to move the circle and change its size.” appears below the note about the optional marker, or below “Marker set” once a marker has been set.
Choose or take photos
“Take photo” requires camera permission. If access is denied, use “Open Settings” to check the permission, or use “Choose photo” instead. The photo picker shares only the image you select with the app. If the image is still stored in iCloud Photos, an internet connection may be needed to download it.
A photo taken in the app is not also saved to the photo library. Use “Cancel loading” to cancel an import in progress.
Try it together
Close management with “Done”, open the device and work through the entire guide. Check each photo, marker and instruction against the actual device. Then let the person using the app try the steps themselves and adjust the guide if needed.
4. Edit or delete content
Device name or photo: Select “Edit” for the device. Change the name or choose another photo. “Remove photo” removes the optional device photo. Finish with “Save”.
Guide: Open “Guides (…)” for the device and select “Edit” for the guide. Change the title or steps, then tap “Save changes”.
Step: Select “Edit step”. If you replace its photo, you can place a new marker on the new photo if needed. Confirm with “Use step”, then save the entire guide.
Remove a step: Confirm “Remove step” and save the guide. You cannot remove the last remaining step on its own; delete the whole guide if needed.
Delete a guide: “Delete guide” followed by “Delete permanently” removes the guide and all its steps.
Delete a device: “Delete device” followed by “Delete permanently” also removes all its guides and steps. This cannot be undone.
Use “Cancel” to leave an editor. If you have made changes, the app asks whether to “Discard changes” or “Keep editing”. Unsaved drafts are not restored after the app is forcibly closed.
5. Advanced setup
Open “Setup” → “Advanced setup”. These settings are saved immediately on this iPhone or iPad; there is no separate save action.
Language
Under “Language / Sprache”, choose “System language”, “Deutsch” or “English”. The app interface changes immediately. “System language” follows the preferred supported app language in iOS. Your device names, task titles and instructions are not translated automatically. The photo picker and other system dialogs follow the iOS app/system language.
Automatic return
“Enable automatic return” is on by default. It returns the app from a device's task list or an open guide to the device list on the home screen after a delay.
In the task list or during a guide: the default is 15 minutes. Use minus and plus to set a delay from 1 to 120 minutes. Touches, scrolling, control actions and VoiceOver focus changes restart this delay.
After “Well done”: the default is 10 seconds, adjustable from 1 to 300 seconds. Touches, scrolling and VoiceOver focus changes do not extend this completion delay. The return button works immediately.
The on/off switch applies to both delays. Turning the feature off preserves the selected values. Time continues to count while the screen is locked or the app is in the background; an overdue return takes place when the app becomes active again.
Setup, device management and editors remain open. Automatic return from the task list also applies to devices without guides. Reopening a guide always starts at step 1. Choose delays that allow the person enough time to read and act.
6. Backup and restore
Open “Setup” → “Backup and restore”. Here you can save the stored content and settings of Alltagslotse to a file and later restore them on this or another iPhone or iPad with Alltagslotse.
The backup contains all devices, guides and steps, including photos, text and markers. Favourites, ordering, language settings and automatic return settings are also included. Save any changes to devices and guides first; unsaved drafts are not included in the backup.
Create a backup
Tap “Create backup”.
Choose a location in the file dialog, such as iCloud Drive. The suggested filename includes “Alltagslotse”, the date and the app version. The file has a “.json” extension.
Confirm saving in the file dialog. The message “The backup has been saved.” confirms completion.
Create a new backup after making significant changes. Keep a copy outside your iPhone or iPad so it remains available if the device is lost. A backup is a snapshot; later changes are not automatically added to the file.
The backup file is not encrypted. It contains your photos and text. Store it in a protected location and only share it with people who may see this content.
Restore a backup
Restoring a backup replaces the current content and settings completely. Existing devices, guides, photos and settings are replaced by the backup. Create a separate backup of the current content and settings first if you want to keep them.
Tap “Restore backup” and select the previously saved “.json” file. An internet connection may be needed for a file stored in iCloud Drive.
The app checks the file, then shows the backup date and the number of devices and guides.
Check these details. “Cancel” leaves the current content and settings unchanged. “Replace and restore” confirms the replacement. This action cannot be undone in the app.
Wait for the message “The backup has been fully restored.” Then check the devices and guides. The language and automatic return delays now also match the backup.
A backup with no devices replaces the current content with an empty collection. Pay particular attention to the number of devices shown before confirming.
If a backup cannot be processed
If a file is invalid, incomplete or damaged, your existing data is preserved. For other errors, check the available storage and access to the file, then try again. If the app reports a newer backup format, update Alltagslotse. The file size limit shown in the app is 256 MB.
7. About – app information
The “About” section in setup contains four links. They open the corresponding pages on mydailyguide.de and require an internet connection.
Homepage: opens the Alltagslotse product page.
Help and feedback: opens the support page for help, questions, problem reports and suggestions.
Privacy policy: opens information about privacy in the app.
Legal notice: opens the provider's details.
The installed app version appears at the bottom of the setup screen. Include it in support requests to help identify questions or problems.
8. How to follow a guide
Explain this short sequence when introducing the app in person:
Tap the device on the home screen.
Choose the task.
Look at the photo, marker and instruction, then carry out the action on the actual device.
Tap “Next” for the next step. “Back” shows the previous step; at the first step, it returns to the task list.
At the last step, tap “Done”. “Well done” appears.
Tap “Back to ‘device name’” to return to the task list, or wait for the configured automatic return to the home screen.
The app does not detect whether the action has been carried out. The person using it decides when to tap “Next” or “Done”.
9. Common questions and problems
Setup does not open
Return to the home screen and activate the gear in the top-left corner three times within three seconds. Moving to a different screen or putting the app in the background clears an unfinished activation sequence.
A device has no guides yet
Open setup and create at least one complete guide under “Guides (…)”. Adding a device alone does not create any help steps.
A photo is missing or will not load
Use “Try again” where available. When importing from iCloud Photos, check your internet connection. If a step photo remains unreadable, replace it in setup, add a new marker if needed and save the guide.
Saving fails
Check the message in the app, the required fields, photos and available storage on the iPhone or iPad. After a save error, your entries remain in the open editor so you can try again.
10. Stored content
Devices, guides and saved photo copies are stored locally on the iPhone or iPad. The app does not provide its own cloud synchronisation between devices. Once saved successfully, guides and their photos can be used without an internet connection. You can also use “Backup and restore” to create or restore a backup file. Depending on your system settings, app data may additionally be included in a device backup.
If you remove the original imported photo from your photo library, the copy already saved in the app remains available.
Briefly describe what happened and the step where you need help. If possible, include your app version and iOS or iPadOS version. Please do not include private photos or personal information from your guides.